JABSCO RULE Bilgenpumpen

Anlagen und Ersatzteile bekommen Sie bei uns ab sofort in unserem ONLINE-SHOP.

Ist die passende Pumpe nicht dabei? Kontaktieren Sie uns, wir beraten Sie gerne und suchen die passende Pumpe heraus.

360 G.P.H. (1363 L.P.H.)

360 G.P.H. (1363 L.P.H.)

360 G.P.H. (1363 L.P.H.)

The Rule 360 provides outstanding quality and value. It is economically priced and designed for small boats. 3⁄4" (19mm) discharge outlet. 12 volt DC.

NON-AUTOMATIC

Model
24 360 gph (1363 lph).
24-35A 360 gph (1363 lph) Pump with Mercury Free Rule-AMatic ® Float Switch.

500 G.P.H (1893 L.P.H.)

500 G.P.H (1893 L.P.H.)

500 G.P.H (1893 L.P.H.)

The Rule 500 offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 pumps are unmatched in pumping power and longevity. 3⁄4'' (19mm) discharge outlet. 12 volt DC unless noted.

RULE-MATE®

Model
RM500A 500 gph (1893 lph) Rule-Mate®
RM500A-24 500 gph (1893 lph) Rule-Mate® (24 volt).

AUTOMATIC

Model
25S

500 gph (1893 lph) Automatic.

25S-24 500 gph (1893 lph) Automatic (24 volt).
25S-6 500 gph (1893 lph) Automatic with 6' (1.8m) leads.

NON-AUTOMATIC

Model
25D 500 ghp (1893 lph).
25DC 500 gph Cartridge (1893 lph).
25DC-6 500 gph (1893 lph) with 6' (1.8m) leads.
25-40A 500 gph (1893 lph) with Mercury Free Rule-AMatic ® Plus™Float Switch.
26D 500 gph (1893 lph) (24 volt).

700/750 G.P.H. (2650/2839 L.P.H.)

500 G.P.H (1893 L.P.H.)

500 G.P.H (1893 L.P.H.)

Rule's 700 and 750 gph pumps offer increased capacity in keeping with its 3⁄4" (19mm) discharge outlet. 12 volt DC unless noted.

RULE-MATE®

Model
RM750A 750 gph (2839 lph) Rule-Mate®.
RM750A-24 750 gph (2839 lph) Rule-Mate® (24 volt).

NON-AUTOMATIC

Model
20RC 700 gph Cartridge (2650 lph).

800 G.P.H. (3028 L.P.H.)

800 G.P.H. (3028 L.P.H.), 20F
20F

800 G.P.H. (3028 L.P.H.), 20R
20R

Rule offers two 800 gph (3028 lph) styles - square and round versions. The square model (20F) offers 36 mounting variations as well as a gas resistant strainer base. 3⁄4" (19mm) discharge outlet. 12 volts DC unless noted.

 

NON-AUTOMATIC

Model
20F

800 gph (3028 lph) Square.

20R 800 gph (3028 lph) Round.
21R 800 gph (3028 lph) Round (24 volt).

AUTOMATIC

Model
20R-35A 800 gph (3028 lph) Pump with Mercury Free Rule-AMatic ® Plus™Float Switch.
20RS 800 gph (3028 lph) Round.

1000 G.P.H. (3785 L.P.H.)

1000 G.P.H. (3785 L.P.H.)

 

The Rule 1000 is in a class by itself and is a popular choice among boat builders and boat owners alike. 36 mounting variations and a gas resistant strainer base make this one of Rule's most popular pumps. 11⁄8" (29mm) discharge outlet. 12 volt DC. noted.

NON-AUTOMATIC

Model
20A 1000 gph (3785 lph).

1100 G.P.H. (4162 L.P.H.)

1100 G.P.H. (4162 L.P.H.)

1100 G.P.H. (4162 L.P.H.)

The Rule 1100 offers impressive pumping power for its size and cost. Competitive models in this pumping range are much larger and far more expensive. 1" (25mm) and 11⁄8" (29mm) discharge outlet. 12 volt DC unless noted.

RULE-MATE®

Model
RM1100A 1100 gph (4162 lph) Rule-Mate®.
RM1100A-24 1100 gph (4162 lph) Rule-Mate® (24 volt).

AUTOMATIC

Model
27S

1100 gph (4162 lph) Automatic.

NON-AUTOMATIC

Model
27D 1100 gph (4162 lph).
27D-6 1100 gph (4162 lph) with 6' (1.8m) wire leads.
27DC 1100 gph (4162 lph) non-automatic (12 volt)
28D 1100 gph (4162 lph) (24 volt).

1500 G.P.H. (5676 L.P.H.)

1500 G.P.H. (5676 L.P.H.), RM1500
RM1500

1500 G.P.H. (5676 L.P.H.), 02
02

High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 11⁄8" (29mm) discharge outlet. 12 volt DC unless noted.

RULE-MATE®

Model
RM1500 1500 gph (5676 lph).
RM500A-24 500 gph (1893 lph) Rule-Mate® (24 volt).

NON-AUTOMATIC

Model
02

1500 gph (5676 lph).

02-6 1500 gph (5676 lph) with 6' (1.8m) wire leads.
03 1500 gph (5676 lph) (24 volt).

GOLD SERIES

Model
04 1500 gph (5676 lph) 5 Year Warranty.

AUTOMATIC

Model
51S 1500 gph (5676 lph).

2000 G.P.H. (7568 L.P.H.)

2000 G.P.H. (7568 L.P.H.), 09
09

2000 G.P.H. (7568 L.P.H.), 10
10

2000 G.P.H. (7568 L.P.H.), 53S
53S

2000 G.P.H. (7568 L.P.H.), RM2000
RM2000

Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 11⁄8" (29mm) discharge outlet. 12 volt DC unless noted.

RULE-MATE®

Model
RM2000 2000 gph (7568 lph).
RM2000-24 2000 gph (7568 lph) (24 volts).

NON-AUTOMATIC

Model
10

2000 gph (7568 lph).

10-6UL 2000 gph (7568lph) -UL listed with 6' (1.8m) wire leads.
11 2000 gph (7568 lph) (32 volt).
12 2000 gph (7568 lph) (24 volt).

GOLD SERIES

Model
09 2000 gph (7568 lph) 5 Year Warranty.

AUTOMATIC

Model
53S 2000 gph (7568 lph) Automatic.

3700 G.P.H. (14002 L.P.H.)

3700 G.P.H. (14002 L.P.H.), 14A
14A

3700 G.P.H. (14002 L.P.H.), 53S
53S

Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 11⁄2" (38mm) discharge outlet. 12 volt DC unless noted.

NON-AUTOMATIC

Model
14A 3700 gph (14002 lph).
14A-6UL 3700 gph (14002 lph) -UL listed with 6' (1.8m) wire leads.
15A 3700 gph (14002 lph) (32 volt).
16A 3700 gph (14002 lph) (24 volt).

GOLD SERIES

Model
13A

3700 gph (14002 lph) 5 Year Warranty.

AUTOMATIC

Model
55S 3700 gph (14002 lph) Automatic.

4000 G.P.H. (15137 L.P.H.)

500 G.P.H (1893 L.P.H.), 56D
56D

500 G.P.H (1893 L.P.H.), 56S
56S

Designed for the toughest applications, the 4000 GPH (15137 LPH) pump optimizes Rule's exclusive design features to produce the highest capacity available for a pump its size. 2" (51mm) discharge outlet. 12 volt DC unless noted.

NON-AUTOMATIC

Model
56D

4000 gph (15137 lph).

56D-24 4000 gph (15137 lph) (24 volt).
56D-32 4000 gph (15137 lph) (32 volt).

AUTOMATIC

Model
56S 4000 gph (15137 lph) Automatic.

8000 G.P.H. (30274 L.P.H.)

8000 G.P.H. (30274 L.P.H.)

Our largest capacity submersible pump. Thoughtfully designed, it incorporates two 4000 gph (15137 lph) pumps which discharge through a common 3" (76mm) discharge outlet. Since the two pumps function independently, if one pump fails, the other will continue to operate providing back-up pumping capability. Replacement motor modules available. 12 volt DC unless noted.

NON-AUTOMATIC

Model
174D

8000 gph (30274 lph).

174D-24 8000 gph (30274 lph) (24 volt).
1750D 8000 gph (30274 lph) Replacement Motor Module (12 volt).

AUTOMATIC

Model
174S 8000 gph (30274 lph) Automatic.
175S 8000 gph (30274 lph) Automatic Replacement Motor Module.

Rule-A-Matic® Float Switch

Rule-A-Matic® Float Switch

Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade "blocked" wire. Designed for pumps drawing up to 14 Amps at 12 volt DC. Model 35A and 35FA now includes a 2 year warranty.

Model
35A

Rule-A-Matic® float switch, 2 1⁄4" x 5" x 1 3⁄4" (57 x 127 x 58mm), 12-24v DC, fuse 14 amp (12v), 7 amp (24v).

35FA Rule-A-Matic® float switch with fuse holder.

Rule-A-Matic® Plus™ Float Switch

Rule-A-Matic® Plus™ Float Switch

Sleek and rugged, the Rule-A-Matic Plus float switch has a strong, fully integrated and impact resistant cover, which protects against debris and jamming. 14 gauge highly abrasive resistant marine grade wire, and a built-in test feature. Designed for pumps drawing up to 20 amps at 12 volt DC. Model 40A and 40FA now includes a 2 year warranty.

Model
40A

Rule-A-Matic® Plus™ float switch, 3" x 5 3⁄8" x 2 1⁄2" (76 x 137 x 64mm), 12-24-32v DC, fuse 20amp (12v), 10amp (24v), 6.5amp (32v).

40FA Rule-A-Matic® Plus™ float switch with fuse holder.

SuperSwitch™ Float Switch

SuperSwitch™ Float Switch

Now backed by a 5 year warranty, the non-mercury SuperSwitch is designed for the toughest applications. Design includes marine grade 14 gauge "blocked wire," larger float for increased buoyancy, removable base for easy servicing and a snap switch design capable of handling pumps drawing up to 20 amps at 12 volt DC.

Model
37A

SuperSwitch™ float switch, 2 1⁄4" x 5" x 2" (57 x 127 x 51mm), 12-24-32v DC, fuse 20amp (12v), 10amp (24v), 6.5 amp (32v).

37FA SuperSwitch™ float switch with fuse holder.

ECO-Switch

ECO-Switch

The Rule ECO-Switch is an ecologically sound automatic bilge pump control switch. Featuring a non-mercury design, the pump operates with simple air pressure. As water rises in the bilge, air rises in the air tube that is attached to the switch. The air pressure activates the switch which controls your pump. All wiring is out of the water and there are no submerged electrical connections at all. Offering complete reliability and outstanding performance, the Rule ECO-Switch offers a viable alternative to traditional float switches. For pumps drawing up to 20 amps.

Model
39

1 7⁄8" x 6" x 2 3⁄4" (48 x 152 x 70mm), 12v DC, fuse 20 amp.

39-24 1 7⁄8" x 6" x 2 3⁄4" (48 x 152 x 70mm), 24v DC, fuse 10 amp.

Amazon Bulkhead

Amazon Bulkhead

For mount ing on bulkhead or deck.

  • Repositionable ports and body offer an amazing 96 assembly variations.
  • Sustainable 12 gpm (45 lpm) output.
  • Self-priming up to 13ft (4m).
  • Corrosion resistant materials throughout.
  • Stainless steel handle supplied with mounting clips and provision for safety lanyard.
Fitting, Size, weight
Fitting: Connections for 1" (25mm) ID hose.
Size: 7" wide x 8" deep x 4 3/4" high (18cm x 20cm x 12cm).
Weight: 1.4lb (0.6kg).
Model
29240-0000 Bulkhead Pump, c/w detachable handle.
29246-1000

Service Kit.

Amazon Thrudeck

Amazon Thrudeck

For mounting through deck or through bulkhead.

  • The ultimate compact through deck pump with no less than 16 port variations relative to the body.
  • Readily achievable 13 gpm (50 lpm) output.
  • Self-priming up to 16ft (5m).
  • Loosening just one screw lets you clear block ag es or position the body anywhere through 360° relative to the handle position.
  • Compact design and low profile allow installation in confined spaces.
  • Sleekly styled Through Deck Kit and cover, with 4 mounting positions relative to the pump.
  • Excellent solids handling ability for use with holding tanks.
  • Corrosion resistant materials throughout.
  • Stainless steel handle supplied with mounting clips and provision for safety lanyard.
Fitting, Size, weight
Fitting: Connections for 1" (25mm) ID hose or 1 1/2" (38mm) hose.
Size: 10" long x 4 5/16" wide x 4 1/2" deep (25cm x 11cm x 12cm).
Weight: 21/2lbs (1.2kg).
Model
29250-0000 1" (25mm) Thrudeck Pump, with detachable handle and Through Deck Kit.
29250-0010 1 1/2" (38mm) Thrudeck Pump, c/w detachable handle and Through Deck Kit.
29256-1000 Service Kit.

Amazon Universal

Amazon Universal

Amazon Universal

For mount ing on bulkhead, through bulkhead, on deck or through deck.

  • Unique safety feature allows operation from both inside and outside the cabin (with optional Through Deck Kit).
  • Flow rate of up to 25 gpm (100 lpm). ■ Self-priming up to 10ft (3m).
  • Push-fit inlet and outlet elbows swivel through 360° to increase flexibility of installation still further.
  • Corrosion resistant materials throughout.
  • Quick release clamp ring gives fast access for blockage clearance.
  • 1 1/2" (38mm) ports give excellent solids handling ability for use with holding tanks.
  • Stainless steel handle supplied with mounting clips and provision for safety lanyard.
Fitting, Size, weight
Fitting: Connections for 1 1/2" (38mm) ID hose.
Size: 9 1/2" wide x 9 1/2" high x 6" deep (24cm x 24cm x 15cm).
Weight: 2.9lb (1.2kg).
Model
29270-0000 Universal Pump, with detachable handle and one Push-fit Elbow.
29279-0000 Optional Through Deck Kit.
29266-1000 Additional Push-fit Elbow.
29276-1000 Service Kit.

Bilge Strainers

Bilge Strainers

Stop bilge debris blocking inlet suction hose and reduce the risk of debris entering and blocking the pump.

  • Available to suit 3/4", 1" and 1 1/2" (19mm, 25mm and 38mm) ID hose.
  • Non-return valve fitted to stop bilge water draining back when pumping stops.
  • Re-positional ports allow horizontal, vertical or sideways hose attachments.
  • Easily removable strainer plate for cleaning.
  • Corrosion resistant materials throughout.
Fitting, Size, weight
Fitting: Connections for 3/4", 1" or 1 1/2" (19mm, 25mm or 38mm) ID hose.
Size: 6 3/4" long x 2 3/4" wide x 2 1/2" high (17cm x 7.2cm x 6cm).
Weight: 1/4 lb (0.1kg).
Model
29290-1020 Bilge Strainer for 3/4" (19mm) ID hose.
29290-1000 Bilge Strainer for 1" (25mm) ID hose.
29290-1010 Bilge Strainer for 1 1/2" (38mm) ID hose.

Amazon Warrior

Amazon Warrior

Amazon Warrior

For mounting on deck, or through deck (with optional Through Deck Kit and Bracket).

  • Robust design par tic u lar ly suited to workboats and larger leisure craft, or any in stal la tion where particularly heavy duty use is an tic i pat ed.
  • 29280-0100 Model with swivel arms and captive wheel nuts meets DTI requirements for use on lifeboats.
  • 18" (45cm) handle assists sustained high outputs of up to 35 gpm (135 lpm).
  • Self-priming up to 17.5ft (5.5m).
  • Double di a phragm design gives maximum ef fi cien cy, and added safety.
  • 1 1/2" (38mm) ports give large solids han dling ability.
  • Can function on one diaphragm in an emergency.
  • Corrosion resistant materials through out.
Fitting, Size, weight
Fitting: Connections for 1 1/2" (38mm) ID hose.
Size: 14" wide x 9 1/2" high x 8" deep (35.5cm x 24cm x 20cm).
Weight: 11lbs (4.95kg).
Model
29280-0000 Warrior Pump, with detachable handle.
29280-0100 Warrior Pump, lifeboat version.
29279-0000 Optional Through Deck Kit.
29289-0000 Under Deck Bracket (required for use with Through Deck Kit).
29286-1000 Service Kit.

In-Line Non-Return Valves

In-Line Non-Return Valves

Non-return valves fit in a pump's suction hose to aid priming and prevent backflow of water into the bilges.

  • Available for three hose sizes - 3/4", 1" and 1 1/2" (19mm, 25mm and 38mm).
  • Simply fit into suction hose.
  • Corrosion resistant materials throughout.
Fitting, Size, weight
Fitting: Connections for 3/4", 1" or 1 1/2" (19mm, 25mm or 38mm) ID hose.
Size: 4 1/4" long x 2 1/8" wide x 2" high (10.8cm x 5.5cm x 5cm).
Weight: 1/4 lb (0.1kg).
Model
29295-1011 In-line non-return valve for 3/4" (19mm) ID hose.
29295-1000 In-line non-return valve for 1" (25mm) ID hose.
29295-1010 In-line non-return valve for 1 1/2" (38mm) ID hose. size 12 volt DC model, fuse 25 amp.

50880 Series Bilge Pump

50880 Series Bilge Pump

50880 Series Bilge Pump

50880 Series Bilge Pump

Robust diaphragm pump suitable for bilge applications with a multipositional pump head.

  • 4.2 gpm (16 lpm) open flow output at 3ft (1m) head.
  • Self-priming up to 10ft (3m) vertical lift allows mounting above wet bilges.
  • Flexible Installation.
  • Compact and simple design.
  • Filter-less.
  • Quiet running.
  • Capable of extensive dry running.
  • Corrosion resistant parts.
  • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
  • ISO 8849 MARINE (Bilge Pump Standard).
Fitting, Size, weight
Fitting: Connections for 3/4" (19mm) ID Hose.
Size: 11.7" long x 5.9" wide x 4.4" high (29.7cm x 15cm x 11.1cm).
Weight: 6lb (2.7kg).
Model
50880-1000 12 volt DC model, fuse 10 amp.
50880-1100 24 volt DC model, fuse 5 amp.
SK880 Service Kit.

PAR-Max 4 31705

PAR-Max 4 31705

Bilge Pumpgard™ Strainer
Included

New generation, continuous rated bilge pump with waterproof coating for harsh environments.

  • 258 usgph (978 lph) open flow output
  • Self-priming up to 10ft (3m) allows mounting above wet bilges.
  • Diaphragm design allows extended dry running.
  • Build-in thermal overload protection.
  • Complete with Pumpgard™ strainer.
  • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
  • ISO 8849 MARINE (Bilge Pump Standard).
Fitting, Size, weight
Fitting: Connections for 3/4" (19mm) ID hose.
Size: 7 1/4" long x 4 1/8 " wide x 4 1/10" high (18cm x 10.5cm x 10cm).
Weight: 5.5lb (2.5kg).
Model
31705-0092 12 volt DC, fuse 10 amp.
31705-0094 24 volt DC, fuse 7 amp.
18912-3050 Diaphragm Kit.

PAR 36680

PAR 36680

Bilge Pumpgard™ Strainer
Included

Fully serviceable, bilge and deckwash pump.

  • 330 usgph (1250 lph) open flow output.
  • Self-priming up to 7ft (2m) vertical lift, allows mounting above wet bilges.
  • Diaphragm design allows extended dry running.
  • Complete with Pumpgard™ strainer.
  • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
  • ISO 8849 MARINE (Bilge Pump Standard).
Fitting, Size, weight
Fitting: Connections for 3/4" (19mm) ID hose.
Size: 7 5/8" long x 6 1/2" wide x 8 1/2" high (19.4cm x 16.5cm x 21.6cm).
Weight: 8lb (6kg).
Model
36680-2000 12 volt DC model, fuse 10 amp.
36680-2010 24 volt DC model, fuse 6 amp.
43990-0062 Service Kit. (new, -2xxx models only).

PAR 36600

PAR 36600

Bilge Pumpgard™ Strainer
Included

Fully serviceable, bilge pump.

  • 475 usgph (1800 lph) open flow output.
  • Self-priming up to 10ft (3m) vertical lift, allows mounting above wet bilges.
  • Diaphragm design allows extended dry running.
  • Complete with Pumpgard™ strainer.
  • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
  • ISO 8849 MARINE (Bilge Pump Standard).
Fitting, Size, weight
Fitting: Connections for 3/4" (19mm) ID hose.
Size: 8 5/8" long x 5 7/8" wide x 8 1/4" high (22cm x 15cm x 21cm).
Weight: 11lb (5kg).
Model
36600-0000 12 volt DC model, fuse 15 amp.
36600-0010 24 volt DC model, fuse 8 amp.
30124-0000 Service Kit.

PAR 34600

PAR 34600

Bilge Pumpgard™ Strainer
Included

Fully serviceable, bilge pump.

  • 645 usgph (2450 lph) open flow output.
  • Self-priming up to 10ft (3m) vertical lift, allows mounting above wet bilges.
  • Diaphragm design allows extended dry running.
  • Permanently lubricated ball bearings add to pump life.
  • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
  • ISO 8849 MARINE (Bilge Pump Standard).
Fitting, Size, weight
Fitting: Connections for 1" (25mm) ID hose.
Size: 9 3/16" long x 8 5/8" wide x 10 1/2" high (23.4cm x 22cm x 26.7cm).
Weight: 13lb (6kg).
Model
34600-0000 12 Vvolt DC model, fuse 15 amp.
34600-0010 24 volt DC model, fuse 8 amp.
30101-0000 Service Kit.

Anlagen und Ersatzteile bekommen Sie bei uns ab sofort in unserem ONLINE-SHOP.

webdesign: michael rabe, hamburg