JABSCO Wasserdrucksysteme

Anlagen und Ersatzteile bekommen Sie bei uns ab sofort in unserem ONLINE-SHOP.

Ist die passende Pumpe nicht dabei? Kontaktieren Sie uns, wir beraten Sie gerne und suchen die passende Pumpe heraus.

Sensor Max™ VSD Constant Pressure Water System Pumps

Sensor Max™ VSD Constant Pressure Water System Pumps

Sensor Max™ VSD Constant Pressure Water System Pumps

Pressure sensor controlled, multi-outlet water pressure pumps, with variable speed drive, serving 1-5 outlets. Motor speed is electronically controlled to maintain steady flow and constant pressure. Sensor Max™ VSD accepts from 10 to 29 volt DC for use with 12 or 24 volt DC power. Amp draw reduces as flow reduces to conserve energy, ranging from less than 1 amp to a maximum of 15 amps.

  • Unique constant water pressure - NO pressure switch.
  • Electronically controlled variable flow.
  • Up to 4.5 gpm (17 lpm) output.
  • Self-priming up to 10ft (3m).
  • Gives constant flow and hot water mix.
  • Eliminates accumulator tank.
  • Runs silently under normal use.
  • Automatically adjusts to 12 Volt dc or 24 Volt dc power input.
  • Conserves battery power - uses lower amps at lower flow.
  • True sensor regulated water pressure.
  • Thermal overload protection automatically stops motor should it overheat due to overload, with auto re-start feature.
  • Diaphragm design allows extended dry running.
  • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
  • Pumpgard™ Strainer included
Fitting, Size, weight
Fitting: Connections for 1/2" (13mm) ID hose or 1/2" Qest threads.
Size: 31750 - 9.0" long x 6.3" wide x 3.75" high (22cm x 16cm x 9.5cm).
31755 - 10.3" long x 6.3" high x 3.75" high (25.2cm x 16cm high x 9.5cm).
Weight: 31750 - 4.3lb (2.0kg).
31755 - 6.3lb (3.0kg).
Flow: 31750 - 0–3.7 gpm (0-14 lpm).
31755 - 0–5 gpm (0-17 lpm).
Running pressure: 31750 - 0000 - 25 psi (1.7 bar).
31750 - 0200 - 20 psi (1.4 bar).
31755 - 0000 - 30 psi (2.1 bar).
31755 - 0200 - 20 psi (1.4 bar).
Shut-off pressure: 31750 - 0000 - 35 psi (2.4 bar).
31750 - 0200 - 25 psi (1.7 bar).
31755 - 0000 - 40 psi (2.8 bar).
31755 - 0200 - 30 psi (2.1 bar).
Model
31750-0000 Sensor Max™ 14, 12-24 volt DC model, fuse 15 amp, high pressure.
31750-0200 Sensor Max™ 14, 12-24 volt DC model, fuse 15 amp, low pressure.
32755-0000 Sensor Max™ 17, 12-24 volt DC model, fuse 15 amp, high pressure.
32755-0200 Sensor Max™ 17, 12-24 volt DC model, fuse 15 amp, low pressure.
18920-9043 Service Kit, all models.
Note
Note:

Use only low shut-off pressure models with all copper water heating tanks.

Sensor Max™ VSD pumps must have a battery installed.

PAR-Max Water System Pumps

PAR-Max Water System Pumps, PAR-Max 1.9
PAR-Max 1.9

PAR-Max Water System Pumps, PAR-Max 2.9
PAR-Max 2.9

PAR-Max Water System Pumps, PAR-Max 7.0
PAR-Max 7.0

The NEW PAR-Max 1.9 and 2.9 Water System Pumps are designed for vessels requiring a smooth low flow, 12 or 24 Volt dc pump at an attractive low price. These new pumps are internally grounded, three chamber diaphragm on-demand pumps with the performance characteristics to match the needs of a typical vessel with a shower, water heater and up to three faucets. The smaller model offers a smooth flow of up to 1.9 gpm (7.2 lpm), whilst the larger models offer 7.0 gpm (26.5 lpm), all are fitted with a built-in pulsation dampening by-pass to control unwanted cycling and noise. We include quick-connect fittings for ease of pump installation.

  • Self priming up to 6-10ft (2-3m).
  • Dry running.
  • Soft rubber mounts.
  • Corrosion resistant.
  • Complies with ISO 8846 MARINE (Ignition Protection).
  • Low noise.
  • Less pulsation in the flow.
  • Screw-less diaphragm design eliminates possible leak paths.
  • Distinctive style.
  • Can eliminate the requirement for an accumulator tank.
Fitting, Size, weight
Fitting: Hose barb or NPT (both supplied).
Size: 31295 - 9" long x 4.5" wide x 4.5" high (23cm x 11cm x 11cm).
31395 - 9" long x 4.5" wide x 4.5" high (23cm x 11cm x 11cm).
Weight: 31295 - 3lb (1.4kg).
31395 - 4lb (1.8kg).
Flow: 31295 - 0-1.9 gpm (0-7.2 lpm).
31395 - 0-2.9 gpm (0-10.9 lpm).
Model
31295-0092 PAR-Max 1.9, 25 psi (1.7 bar), 12 volt DC model, fuse 10 amp.
31295-0094 PAR-Max 1.9, 25 psi (1.7 bar), 24 volt DC model, fuse 6 amp.
31395-0092* PAR-Max 2.9, 50 psi (3.5 bar), 12 volt DC model, fuse 10 amp.
31395-0094* PAR-Max 2.9, 50 psi (3.5 bar), 24 volt DC model, fuse 6 amp.
31395-0292 PAR-Max 2.9, 25 psi (1.7 bar), 12 volt DC model, fuse 10 amp.
31395-0294 PAR-Max 2.9, 25 psi (1.7 bar), 24 volt DC model, fuse 6 amp.
31395-0392 PAR-Max 2.9, 40 psi (2.8 bar), 12 volt DC model, fuse 10 amp.
31395-0394 PAR-Max 2.9, 40 psi (2.8 bar), 24 volt DC model, fuse 6 amp.
52600-0092 PAR-Max 7.0, 60 psi (4.1 bar), 12 volt DC model, 35 amp draw.
52600-0094 PAR-Max 7.0, 60 psi (4.1 bar), 24 volt DC model, 20 amp draw.
52600-0292 PAR-Max 7.0, 40 psi (2.7 bar), 12 volt DC model, 30 amp draw.
52600-0294 PAR-Max 7.0, 40 psi (2.7 bar), 24 volt DC model, 15 amp draw.

*Not available in Europe.

32600 – Series Automatic Water System Pump

32600 – Series Automatic Water System Pump

This conventional pressure switch controlled pump enjoys the same pulsation free 3 chamber diaphragm design as our PAR-Max 2.9 & 1.9 but incorporates a heavy duty motor, giving higher flows and long life for such a small footprint. Like all Jabsco water pressure system pumps it is inherently quiet, self-priming and can run dry without damage. Quickconnect fittings are included.

  • Powerful 3.5 gpm (13.2 lpm) flow rate.
  • Shut off pressures from 25 psi (1.7 bar) to 40 psi (2.8 bar)
  • Self priming up to 3m (10ft)
Fitting, Size, weight
Fitting: 2 x 1/2" Male
Weight: 5.0lb (2.1kg).
Model
32600-0092 12 volt DC model, fuse 15 amp, pressure switch setting 40 psi (2.8 bar).
32600-0094 24 volt DC model, fuse 10 amp, pressure switch setting 40 psi (2.8 bar).
32600-0292 12 volt DC model, fuse 15 amp, pressure switch setting 25 psi (1.7 bar).
32600-0294 24 volt DC model, fuse 10 amp, pressure switch setting 25 psi (1.7 bar).

Suitable for Worldwide.

PAR-Max 4 Water System Pump

PAR-Max 4 Water System Pump

New generation multi outlet water pressure pump serves 4 or more 1/2" (13mm) outlets at any one time. Snap-fit ports simplify both installation and removal for routine service.

  • 4.3 gpm (16.3 lpm) open flow output.
  • Self-priming up to 10ft (3m).
  • Four piston diaphragm sealed for smooth and quiet operation.
  • Thermal overload protection automatically stops motor should it overheat due to overload, with auto re-start feature.
  • Diaphragm design allows extended dry running.
  • Pressure switch cut-in 10 psi (0.7 bar), cut-out 25 psi (1.7 bar), low pressure, or cut-in 20 psi (1.4 bar) cut-out 40 psi (2.8 bar), high pressure.
  • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
Fitting, Size, weight
Fitting: Connections for 1/2" (13mm) ID hose or 1/2" Qest threads.
Size: 9.8" long x 4.2" wide x 4.1" high (25cm x 10.6cm x 10cm).
Weight: 6lb (2.7kg).
Model
31620-0092 12 volt DC model, fuse 15 amp, high pressure.
31620-0094 24 volt DC model, fuse 7 amp, high pressure.
31620-0292 12 volt DC model, fuse 15 amp, low pressure.
31620-0294 24 volt DC model, fuse 7 amp, low pressure.
31630-0092 12 volt DC model, fuse 15 amp, high pressure, motor dip coated.
18920-9043 Service Kit.

*Not available in Europe.

Dual Max VSD Water System

Dual Max VSD Water System

The Dual Max VSD combines a smooth flowing VSD Water System Pump with a PAR-Max 4 to provide up to 8 gallons per minute when demand increases. The VSD Pump with its variable speed motor provides smooth even flow as needed for several outlets. If demand exceeds the VSD's normal operating range the PAR-Max 4 kicks in to add enough additional flow to accommodate as many as 7 outlets.

  • Unique constant water pressure.
  • VSD Pump is electronically controlled for variable flow.
  • Self-priming up to 10 feet.
  • Constant flow for even hot water mix.
  • No need for an accumulator tank.
  • Thermal overload protection automatically stops motors if they overheat due to overload, with auto re-start feature.
  • Diaphragm design allows extended dry running.
  • Complies with USCG 183.410 and ISO 8846 for ignition protection.
Fitting, Size, weight
Fitting: Connections 1/2" NPT.
Size: 12 1/2" long x 8 1/2" wide x 8 7/8" high (32cm x 22cm x 22cm).
Weight: 131/2 lb (6kg).
Model
31765-0092 12 volt DC model.
31765-0094 24 volt DC model.

Ultra Max Water Pressure Set

Ultra Max Water Pressure Set

A fully assembled pressure set that simplifies the installation of water pressure systems for both the professional and amateur installer. The set consists of a PAR-Max 3 pump, strainer and pre-pressurized accumulator tank with quick connect electrical connections on a rubber mounted board. Serves 3 or more 1/2" (13mm) outlets.

  • Flow of 3.5 gpm (13.2 lpm).
  • Self-priming up to 10ft (3m).
  • Can be installed vertically or horizontally.
  • Quadruple diaphragms for smooth and quiet operation.
  • Thermal overload protection automatically stops motor should it overheat due to overload, with auto re-start feature.
  • Diaphragm design allows extended dry running.
  • Low pressure switch cut-in 10 psi (0.7bar), cut-out 20 psi (1.4 bar).
  • High pressure switch cut-in 20 psi (1.4 bar), cut-out 40 psi (2.8 bar). Maintenance free potable water quality accumulator tank.
  • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
Fitting, Size, weight
Fitting: Connections for 1/2" (13mm) ID hose or 1/2" (15mm) Qest fittings.
Size: 15 1/2" long x 15 3/4" wide x 5 1/2" high (39cm x 40cm x 14cm).
Weight: 6.6lb (3kg).
Model
59451-0012 12 volt DC model, fuse 10 amp, low pressure version.
59451-0024 24 volt DC model, fuse 6 amp, low pressure version.
59451-1012 12 volt DC model, fuse 10 amp, high pressure version.
59451-1024 24 volt DC model, fuse 6 amp, high pressure version.

Aqua Filta™

Aqua Filta™

Aqua Filta™

Aqua Filta adsorbs dissolved impurities fresh-ening and cleansing water to make it natural tasting, sweet smelling and crystal clear.

  • Screw-on cartridge is replaced annually or sooner if necessary, at half the cost of replacement filters.
  • Over 200g of silver impregnated activated carbon.
  • Beneficial mineral salts are retained.
  • Ports accept fitment to either 13mm (1⁄2") ID hose or 1⁄2" screw-in fittings for polybutylene or copper plumbing.
  • Initial flow capacity up to 14 lpm (3.7 gpm).
  • Tough moulded components give ample pressure capability, up to 4.2 bar (60 psi).
Fitting, Size, weight
Fitting: Connections for 13mm (1⁄2") ID hose, 15mm Hep20 and Acorn fittings, 15mm John Guest speedfit and Whale system 15 fittings and 1⁄2" BSP female threaded fittings.
Size: 23cm high x 14cm deep x 10cm wide (9" x 5 1⁄2" x 4").
Weight: 500g (1.1lb).
Model
59000-1000 Aqua Filta.
59100-0000 Replacement Filter Cartridge.

PAR 36900 Water Pressure Pump

PAR 36900 Water Pressure Pump

This well established and service proven pump will serve up to 5 outlets simultaneously and generously.

  • 4.2 gpm (16 lpm) open flow output.
  • Self-priming up to 5ft (1.5m) vertical lift.
  • Belt driven for quieter running and longer life.
  • Diaphragm design allows extended dry running.
  • Low pressure switch cut-in 10 psi (0.7bar), cut-out 20 psi (0.7 bar).
  • High pressure switch cut-in 20 psi (1.4 bar), cut-out 40 psi (2.8 bar).
  • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
Fitting, Size, weight
Fitting: Connections for 1/2"-5/8" (13-16mm)
ID hose.
Size: 9 7/8" long x 6 1/2" wide x 10 1/8" high
(25.1cm x 16.5cm x 25.8cm).
Weight: 12lb (5.4kg).
Model
36900-0200 12 volt DC model, fuse 15 amp, low pressure version.
36900-0210 24 volt DC model, fuse 5 amp, low pressure version.
36900-1000 12 volt DC model,fuse 15 amp, high pressure version.
36900-1010 24 volt DC model,fuse 5 amp, high pressure version.
30121-0000 Service Kit.

PAR 36800 Water Pressure Pump

PAR 36800 Water Pressure Pump

This well established and service proven pump will serve up to 4 outlets simultaneously and generously.

  • 3.3 gpm (12.5 lpm) open flow output.
  • Self-priming and all other benefits as PAR 36900 above.
  • Low pressure switch cut-in 10 psi (0.7 bar), cut-out 20 psi (1.4 bar).
  • High pressure switch cut-in 20 psi (1.4 bar), cut-out 40 psi (2.8 bar).
  • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
Fitting, Size, weight
Fitting: Connections for 1/2"-5/8" (13-16mm) ID hose.
Size: 9 7/8" long x 61/2" wide x 8 3/8" high (25.1cm x 16.5cm x 21.3cm).
Weight: 11lb (5kg).
Model
36800-0200 12 volt DC model,fuse 8 amp, low pressure version.
36800-0210 24 volt DC model,fuse 4 amp, low pressure version.
36800-1000 12 volt DC model,fuse 8 amp, high pressure version.
36800-1010 24 volt DC model,fuse 4 amp, high pressure version.
30122-0000 Service Kit.

PAR 36950 Water Pressure Pump

PAR 36950 Water Pressure Pump

This very popular service proven pump serves up to 4 outlets simultaneously and generously.

  • 3 gpm (11.4 lpm) open flow output.
  • Self-priming and all other benefits as PAR 36900 above.
  • Low pressure switch cut-in 10 psi (0.7 bar), cut-out 20 psi (1.4 bar).
  • High pressure switch cut-in 20 psi (1.4 bar), cut-out 40 psi (2.8 bar).
  • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
Fitting, Size, weight
Fitting: Connections for 1/2"-5/8" (13-16mm) ID hose.
Size: 7 1/2" long x 6 1/2" wide x 8 1/2" high (19.1cm x 22cm x 21.6cm).
Weight: 11lb (5kg).
Model
36950-2000 12 volt DC model, fuse 8 amp, high pressure version.
36950-2010 24 volt DC model, fuse 4 amp, high pressure version.
36950-2200 12 volt DC model, fuse 8 amp, low pressure version
36950-2210 24 volt DC model, fuse 4 amp, low pressure version.
43990-0061 Service Kit.

Water System Pumpgard™ Strainer

Water System Pumpgard™ Strainer

Inlet strainer protects all electric diaphragm pumps.

  • Prevents unnecessary pump breakdowns caused by particles in the water.
  • Transparent housing allows instant inspection.
  • Quick, in-place, cleaning of the 40 mesh stainless steel screen.
Fitting, Size, weight
Fitting: Choose connections for 3/8", 1/2", 3/4" (13mm) ID hose, or 1/2"-14 pipe.
Size: 4 3/4" long x 2 3/4" wide x 2 1/2" high (12cm x 7cm x 6cm).
Model
46400-0000 3/4" (19mm) ID hose x 3/4" (19mm) ID hose.
46400-0002 Model for 1/2" (13mm) ID hose.
46400-0003 3/8" (10mm) ID hose x 3/8" (10mm) ID hose.
46400-0004 Model for 1/2"-14 pipe threads.
46400-0010 3/4" (19mm) ID hose x plugin 90 degree.
46400-0012 Model for 1/2" (13mm) hose inlet 90 degree and direct plug into PAR-Max inlet port.
46400-0014 Model for 1/2"-14 pipe inlet 90° and direct plug into PAR-Max inlet port.
46400-0375 3/8" NPT (F) x 3/8" NPT (F).
46400-9500 Model for snap in 90° out fitting (quad+quad).
18753-0040 Replacement 40# Mesh Filter.

Pressurized Accumulator Tanks

Pressurized Accumulator Tanks, 21 oz (0.6 Litre)
21 oz (0.6 Litre)

Pressurized Accumulator Tanks, 1 Quart (1 Litre)
1 Quart (1 Litre)

Improves all pressure controlled water systems. Our new compact 21 oz (0.6 Liter) accumulator tank fits into those tight areas, and performs all of the same functions as our 1 Quart model (1 Liter), but in a smaller package.

  • Smoother flow, quieter water systems.
  • Internal rubber membrane eliminates maintenance and allows universal mounting.
  • Better control of hot water temperatures.
  • Simply fitted to new or existing systems.
  • Longer pump life, lower battery drain.
  • Snap-in port fittings.
Fitting, Size, weight
Fitting: Connections for 1/2" (13mm) ID hose, optional ports available, see below.
Size: 21oz (0.6 liter) - 4 3/8" deep x 4 3/4" wide x 7" high (11cm x 12cm x 18cm).
1 Quart (1 liter) - 4 3/8" deep x 4 3/4" wide x 13 1/4" high (11cm x 12cm x 34cm).
Weight: 21oz (0.6 liter) - 1lb (0.45kg).
1 Quart (1 liter) - 1.6lb (0.7kg).
Model
30573-0003 NEW! Pressurized 21oz (0.6 Liter) Accumulator Tank.
30573-0000 Pressurized 1 Quart (1 Liter) Accumulator Tank
30653-0000 Snap-in port fittings for 1/2" (12.5 mm) ID hose.
30649-0000 Snap-in port fittings for 1/2"-14 pipe.
30649-1000 Snap-in port fittings for 1/2" female threads.

Larger Pressurized Accumulator Tanks

Larger Pressurized Accumulator Tanks

Larger Pressurized Accumulator Tanks

Smooth flow from faucets and showers, reduce pump cycling, eliminate pulsations and water hammer.

  • Can be mounted vertically or horizontally.
  • Water is totally separated from air chamber by a rubber bladder.
  • All models include mounting brackets

18810-0000 (US supply)

  • 2 gallon tank NSF-61 listed.
  • 100 psi (6.9 bar) Max. working pressure, pre-pressurized to 20 psi (1.4 bar).
  • Connection for 3/4" NPT male thread.
  • 8" dia. x 12 5/8" high (20cm x 32cm).

23240-2000 (European supply)

  • 8 liter (13/4 gal) volume.
  • 3.4 bar (50 psi) Max. working pressure.
  • Connection for 3/4" BSP Female thread.
  • 22cm dia. x 33cm high (8 1/2" x 13").

PAR-Max 3.0 GPM Washdown Pump Kit

PAR-Max 3.0 GPM Washdown Pump Kit

  • Powerful 3.0 gpm (11.4 lpm) flow rate.
  • Shut off pressure 50 psi (3.5 bar).
  • Suitable for Marine Washdown.
  • Self priming up to 3m (10ft).
Fitting, Size, weight
Fitting: Connections for 1/2" or 3/4" hose.
Weight: 3.5lb (1.6kg).

Suitable for North America:

Model
32305-0092 12 volt DC model, 10 amp fuse size.
32305-0094 24 volt DC model, 5 amp fuse size.

Suitable for Worldwide:

Model
32305-0392 12 volt DC model, 10 amp fuse size.
32305-0394 24 volt DC model, 5 amp fuse size.
32901-0092 12 volt DC model, 10 amp fuse size.
32901-0094 24 volt DC model, 5 amp fuse size.

PAR-Max 4.0 GPM Washdown Pump Kit

PAR-Max 4.0 GPM Washdown Pump Kit

PAR-Max 4.0 GPM Washdown Pump Kit

  • Powerful 4.0 gpm (15 lpm) flow rate.
  • Shut-off pressure 60 psi (4.3 bar).
  • Suitable for high pressure applications.
  • Self priming up to 10ft (3m).
Fitting, Size, weight
Fitting: Connections for 3/4" (19mm) ID hose.
Size: 7.8" long x 4.0" wide x 4.0" high
(20cm x 10cm x 10cm).
Weight: 5lb (2.1kg).

Suitable for North America:

Model
32605-0092 12 volt DC model, fuse 15 amp.
32605-0094 24 volt DC model, fuse 10 amp.
32900-0092 12 volt DC model with 25ft (7.6m) hose coil.
32900-0094 24 volt DC model with 25ft (7.6m) hose coil.

Suitable for Europe:

Model
32605-0392 12 volt DC model, fuse 15 amp.
32605-0394 24 volt DC model, fuse 10 amp.
32900-0092 12 volt DC model with 25ft (7.6m) hose coil.
32900-0094 24 volt DC model with 25ft (7.6m) hose coil.

PAR-Max 5.0 Washdown Pump Kit

PAR-Max 5.0 Washdown Pump Kit

  • Powerful 5.0 gpm (18.9 lpm) flow rate.
  • Shut-off pressure 50 psi (3.5 bar).
  • Very heavy duty motor for applications where continuous rating is required.
  • Self priming up to 10ft (3m).
Fitting, Size, weight
Fitting: Connections for 3/4" (19mm) ID hose.
Size: 9.8" long x 4.2" wide x 4.1" high (25cm x 106cm x 10cm).
Weight: 6.5lb (3.0kg).

Suitable for North America:

Model
32700-0092* 12 volt DC model, fuse 15 amp.
32700-0094* 24 volt DC model, fuse 7 amp.
32700-0392** 12 volt DC model, fuse 15 amp.
32700-0394** 24 volt DC model, fuse 7 amp.
32902-0092 12 volt DC model, fuse 15 amp.
32902-0094 24 volt DC model, fuse 7 amp.

Suitable for Worldwide:

Model
32700-0392 12 volt DC model, fuse 15 amp.
32700-0394 24 volt DC model, fuse 7 amp.

*1/2" connectors included for European versions.

PAR-Max 7.0 GPM Ultra Washdown Pump Kit

PAR-Max 7.0 GPM Ultra Washdown Pump Kit

  • Powerful 5.0 gpm (18.9 lpm) flow rate.
  • Shut off pressure 50 psi (3.5 bar).
  • Suitable for Marine Washdown.
  • Self priming up to 2.5m (8ft).
Fitting, Size, weight
Fitting: Connections for 1/2" or 3/4" hose.
Weight: 6.5lb (3.0kg).

Suitable for North America:

Model
52900-0092 12 volt DC model, 28 amp.
52900-0094 24 volt DC model, 14 amp.

Anlagen und Ersatzteile bekommen Sie bei uns ab sofort in unserem ONLINE-SHOP.

webdesign: michael rabe, hamburg